Skip to main content

Reuse Your Rechargeable Batteries





Did your UPS/Bike battery got expired ?? Dont throw it you can again reuse it

Warning:This method is only for Lead Acid batteries,not for Lithium ion battery
My desktop ups battery has expired and it was in dead condition.so I want to recycle the battery …this is a effective way and this method is used in battery servicing stations ….it’s so simple and easy..U can do it in your home
STEP 1: things required
1) Water (more pure the water more effective outcome better u can use distilled water)
             you can use water that available in your home,but distilled water is more effective  
              (click here for How to make distilled water in home)                                                                          
2) Syringe (anything which pours water on battery hole)
3) Dead battery (be sure that the battery is not in popped condition)
  
STEP 1: Remove  the top cover of the battery as shown in fig



BEFORE WATER FILLING                                     

After Removing Top


STEP 2: Remove the cap and fill with water 


STEP 3: Now replace the cover ...now recharge the battery ...Recharge for larger time for eg if u are                  using 1 Amp charger then recharge the battery for at-least 6 hours.
Now check for the voltage
NOTE:1.recharge for at least 6 hours(1 amp charger)
             2.for higher efficiency  distilled water
             3.kindly note that this time the u cant get the original rated (12.6)voltage.The battery shown                   here which has been refilled for the third time,so the output voltage  reduced to 9.6v,but if                   doing the refill for the first time means you will get 12V max
               
Labels:

Comments

  1. Unknown20 November 2017 at 05:24

    Really this post is very informative. I like these type of post. I will recommend some other people to read this post.
    Buy Car Battery Online

    ReplyDelete

Post a Comment

Popular posts from this blog

How to Hack Your College/Hostel Wifi

Do you want to use the maximum bandwidth of your wifi connection ?? Do you want to block others using the wifi connection?? Step 1:Go to www.arcai.com and download netcut software click here to goto download page Step 2:Install it (Note :After installing Netcut it will ask your permission to install winPcap,You have                           to Install both the Netcut and WinPcap ) Step 3:Open Netcut as an administrator Step 4:Identify your laptop ip and wifi router ip. Step 5:Except your lap ip and router ip block all others ip by clicking on each ip and clicking                           cutoff(ready) tab,After blocking you will find like this Step 6:If u want to unblock an IP just click on it and click Resume tab Step 7:To avoid blocking your mobile/devices connected on the same network check for your       ...
1 comment
Read more

How to Install Telnet In Windows

Telnet  is a user command and an underlying TCP/IP protocol for accessing remote computers. Through  Telnet , an administrator or another user can access someone else's computer remotely. Its very easy to telnet in your Computer.Using Telnet you can work on unix server available online,communication with microcontroller and many more.Here are some steps how to install telnet in your computer Step 1: Go to  Start->type TurnWindowsFeatures On Step 2:Open it and wait for a while Step 3:Now choose telnet server and telnet client from the available option Step 4:Click on Ok and Restart your computer  Now Telnet has been installed in your computer For doubts watch this video
Post a Comment
Read more